What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
11.06.2025 03:56

Can the fuse protect the electronic devices from lightning instead of a surge protector.
So, the voltage could go up to 500 volts, and the fuse will not open up.
An AC voltage/ current source, and an ac inductive load.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
It also is a device that limits the change in current flow.
This one hit behind the barn.
This device then solves the entire problem.
The other is “what does a “fuse” do?”
2024–10–14 [Omar Gharbi Omar Gharbi ]
Random Eagles notes: Bryce Huff trade perhaps signals some confidence in Azeez Ojulari - PhillyVoice
The MOV will conduct when the voltage exceeds 50% of line voltage.
The bolt then partially travels down the line to your home.
Here is a simplified AC power diagram.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
But it can get overloaded, and no longer works.
I post the exact comment here.
Amazon reveals best books of the year so far: Suzanne Collins, S. A. Cosby make the list - USA Today
He then describes the function of a fuse.
At least they know the answer if they wanted it.
He then describes Rainy Season and Lightning.
Is there a correlation between being a medium and mental health?
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
a photo is worth a thousand words.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Why Passing on Palantir Technologies Stock (PLTR) is a Big Mistake - Yahoo Finance
One is “what exactly is in a ‘surge protector’ ? ”
The third is lightning and “how it gets conducted into a home.”
This is the picture of an electronic coil of wire wound around a core of magnetic material.
what exactly is a ‘surge’ protector?
For this case there are devices called Metal oxide varistors (MOV).
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
One
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
He then asserts :
If you were president, how would you make America "great again?"
Because the load is inductive, the current lags the voltage.(by a bit).
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Edit 2024–10.
2024–10–16 [ OO OLAOYE OYEBODE ]
There are two important concepts here.
This is 'the assistant's answer'
Pacers’ Tyrese Haliburton stuns Thunder in last second to open NBA Finals - The Washington Post
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Barnstars:
This is where this question deviates from being a 'generic' question, and becomes more specific.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
This is where the MOV conducts again, and dissipated the energy.
It seems Mohan does not understand the difference between a comment and an Answer.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
In schematic diagrams this is the symbol for a fuse:
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
the problem then depends on "how fast does the fuse operate?".
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
What is lightning?
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
nine
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
so, what happens?
eight
2024–10–10[John johnson John Johnson ]
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
but this device (an Inductor) … impedes the rapid changes in the current.
But… the neutral is now “floating” because of the 1 ohm resistance.
[old diagram got deleted by accident]
First Sentence:
but I think this circuit , shows a few more pieces.
There are three different concepts here that are getting confused.
Upvotes:
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
At one ohm, the resistor has a maximum of 1 watt power.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
A circuit breaker is similar, but is resettable.
These are simplified answers to the original question, and does not change anything I wrote above.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Now when you have a certain ac resistance, then a current flows in a loop.
(Dc diagram shown, AC is similar).
[image of Common-mode choke]
A fuse is a non-resetable over current circuit protector.
These devices are installed between the “hot” and “neutral” and protective ground.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
What does a fuse do?